Equalizer
Most motorcycles do not usually come with LED turn signals and LED taillights. However, a simple replacement of the original turn signals and taillights is not possible without an error message in the error memory. One way to install the desired LEDs is so-called load resistors or equalizers. It is important to install the right ones from a variety of available modules. Otherwise, the electronics of the motorcycle may cause irreparable damage.
Rear Equalizer for the new 2025 HD-models
The new 2025 Equalizer is required to convert or replace the rear fender on Softail 2025 models with a center rear light (Heritage FLHC, LowRider S FXLRS, or LowRider ST FXLRST). Without this adapter, interference and error messages will occur in the motorcycle’s electronics.
The Equalizer shown has an outer diameter of 18 mm, a total length of 46 mm, is waterproof, and can therefore be easily “hidden.” The four connecting cables have the original colors of the rear fender and only need to be connected to the original connector [40 A] with the same color
Rear Equalizer for all current HD-models
The shown Equalizer has an outer diameter of 14 mm and a total length of 32 mm. It is designed for the connection of a pair of indicators and in version A additionally for a rear light.
Version A: (5 cores) Universal resistor with blocking diode for all LED turn signals, also in conjunction with LED turn signals. Provides normal flashing frequency regardless of load. TB-ArtNo. : 41-99-657
Version B: (3 cores) The Load Equalizer allows conversion to other LED indicators, such as Thunderbike Stripes. Suitable for Harley-Davidson Revolution Max models from ’21 onwards such as Sportster RH or Pan Amercia. TB-ArtNo. : 41-99-659
Notsuitable for rear 3in1 turn signals with integrated taillight/brake light.
Front Equalizer for all current HD-models
The shown Equalizer has an outer diameter of 18 mm and a total length of 46 mm. It is designed for the additional connection of two indicators.
The flashing frequency sensor is a universally applicable resistor for all LED indicators, which ensures a normal flashing frequency regardless of load. It is suitable for connecting a pair of indicators.
ATTENTION: The Equalizer can get very hot in continuous operation.